◈ Introduction
TC-1400A is an audio equipment tester developed for performance tests of microphones and speakers.
TC-1400A bears both signal generator and signal analyzer inside. The generator can send a tone signal within 100 Hz ~ 10 kHz range by 1 Hz span
and the analyzer can measure frequency, tone level, and distortion (SNR, SINAD, THD, etc.) of the signal at the same time.
◈ Benefits and Key Features
※ Signal generator and signal analyzer in one device.
※ Simple and simultaneous audio performance tests: frequency, tone level, SNR, THD, SINAD.
※ Switchable 4 port inputs (LINE IN L/R, MIC 1/2), switchable 4 port outputs (LINE OUT L/R, SPK 1/2).
※ Microphone circuit inside.
- Just connect a microphone to MIC 1/2 port without an extra circuit.
※ Additional functionality available by equipping optional modules to DB25 port for specialized tests (ex: ear jack hook test, input impedance shift).
※ Convenient remote control.
- Remote control through ETHERNET port (TCP/IP) or USB Port (USB To Serial) GPIB.
※ Compact size for portability and easy set-up
※ Analysis software
- GUI for port setting, generator/analyzer control, signal analysis in time/frequency domains.
- Easy preservation of graphical data as a file (.csv).
※ Audio Sweep
※ A part of custom audio equipment testing solution
- With affiliated products such as Audio Shield Box, fixture, speaker, microphone, and automating software of Tescom, we can provide an optimal testing solution as a whole rather than just one equipment.
◈ Audio Analyzer
1. Input (Line In)
Input
Port |
|
LINE IN L / LINE
IN R |
Frequency
Range |
|
100
Hz ~ 10 kHz |
Frequency
Accuracy |
|
±50
ppm |
Frequency Resolution |
by Num of
point(FFT size/2) |
ex)
±3 Hz @ 4096 |
Input Level Range |
|
-5
dBV ~ -70 dBV |
Input Level Accuracy |
100 Hz ~ 10 kHz |
≤
±0.2 dBV |
10 kHz ~ 20 kHz |
≤
±0.5 dBV |
|
Input Level Resolution |
|
0.01
dBV |
Noise Level [No Signal] |
|
-94
dBV [20 uV] |
Input Impedance |
|
>
100 kOhm |
Frequency Response |
100 Hz ~ 10 kHz, referenced to 1 kHz |
≤ ±0.1 dBV |
Distortion
@ -5 dBV / -20 dBV |
||
SNR |
100 Hz ~ 10
kHz |
>78
dB @ -5 dBV, >77 dB @ -20 dBV |
SINAD |
100 Hz ~ 10k
Hz |
>70
dB @ -5 dBV, >77 dB @ -20 dBV |
THD |
100 Hz ~ 200
Hz |
<0.06
% @ -5 dBV, <0.01 % @ -20 dBV |
200 Hz ~ 10
kHz |
<0.04
% @ -5 dBV, <0.01 % @ -20 dBV |
|
Crosstalk attenuation |
< 4 kHz |
>64
dB |
< 10 kHz |
>55
dB |
2. Input (MIC In)
Input
Port |
|
MIC IN 1 /
MIC IN 2 |
Microphone
bias voltage |
|
5
V |
Microphone
bias resistor |
|
4.7
kOhm |
Frequency
Range |
|
100
Hz ~ 10 kHz |
Frequency
Accuracy |
|
±50
ppm |
Frequency Resolution |
by Num of
point(FFT size/2) |
ex)
±3 Hz @ 4096 |
Input Level Range |
|
-20
dBV ~ -70 dBV |
Input Level Accuracy |
100 Hz ~ 10 kHz |
≤
±0.2 dBV |
10 kHz ~ 20 kHz |
≤
±0.5 dBV |
|
Input Level Resolution |
|
0.01
dBv |
Noise Level [No Signal] |
|
-
100dBV [10 uV] |
Input Impedance |
|
>
100 kOhm |
Frequency Response |
100 Hz ~ 10 kHz, referenced to 1 kHz |
≤ ±0.1 dBV |
Distortion
@ -20 dBV |
||
SNR |
100 Hz ~ 10
kHz |
>69
dB @ -20 dBV |
SINAD |
100 Hz ~ 10
kHz |
>64
dB @ -20 dBV |
THD |
100 Hz ~ 10 kHz |
<0.05
% @ -20 dBV |
Crosstalk Attenuation |
< 10 kHz |
>70
dB |
◈ Audio Generator
1. Output (Line Out)
Output
Port |
|
Line OUT L /
Line OUT R |
Frequency
Range |
|
100
Hz ~ 10 kHz |
Frequency
Accuracy |
|
±50
ppm |
Frequency Resolution |
|
1
Hz |
Signal Source |
24 bit |
PCM |
Output Impedance |
|
16
Ohm (Typ.) |
Output Level Range |
|
-5
dBV ~ -60 dBV |
Output Level Accuracy |
100 Hz ~ 20 kHz |
≤
±0.2 dBV |
Output Level Resolution |
|
0.1
dBV |
Noise Level [No Signal] |
|
-100dBV
[10 uV] |
Frequency Response |
100 Hz ~ 20 kHz,
referenced to 1 kHz |
≤ ±0.15 dBV |
Distortion
@ -5 dBV / -20 dBV |
||
SINAD |
100 Hz ~ 10 kHz |
>77
dB |
THD |
100 Hz ~ 10 kHz |
<0.01
% |
Crosstalk attenuation |
< 20 kHz |
>90
dB |
2. Output (SPK Out)
Output
Port |
|
SPK OUT 1 /
SPK OUT 2 |
Frequency
Range |
|
100
Hz ~ 10 kHz |
Frequency
Accuracy |
|
±50
ppm |
Frequency Resolution |
|
1
Hz |
Signal Source |
24 bit |
PWM |
Output Impedance |
|
3
Ohm (Typ.) |
Output Level Range |
|
6
dBV ~ -60 dBV |
Output Level Accuracy |
100 Hz ~ 20 kHz |
≤
±0.2 dBV |
Output Level Resolution |
|
0.1
dBV |
Max Voltage / Power |
2 Vrms |
1
W (ref. 4 Ohm) |
Noise Level [No Signal] |
|
-85dBV
[60 uV] |
Frequency Response |
100 Hz ~ 20 kHz,
referenced to 1 kHz |
≤ ±0.1 dBV |
◈ Miscellaneous
Dimension |
196(W)
x 226(D) x 70(H) mm |
Weight |
1.7
kg |
*Packing
Size |
464(W)
x 345(D) x 146(H) mm |
*Packing
Weight |
3
kg |
*The size and/or weight of a package may vary depending on how the package is packed.
Temperature |
Operating temperature range |
+5 ℃ to +45 ℃ |
Storage temperature range |
-5 ℃ to +55 ℃ |
|
Specification
validity temperature |
+15 ℃ to +35 ℃ |
◈ Ordering Information
※ Order Number
- TC-1400A : Audio Tester (including accessories below)
▷ Test Report
▷ RJ45 Cable, RJ45 8(p)-RJ45 8(p) 2 M, 1 pc
▷ DB25 to DB25 Cable, 1 pc
▷ DB25 to BNC Cable, 1pc
▷ Power cable 220V ,1 pc