TC-2800A is an economically efficient, optimal solution for the reliable measurement of C/NO and reception sensitivity of single or multiple DUTs in the GNSS receiver production line.
Stable System Architecture
TC-2800A deploys FPGA-based Software-Define-Radio (SDR) architecture for stable signal and efficient GPS/GLONASS signal transmission, which require high accuracy.
Wide Dynamic Power Range
TC-2800A provides a wide and continuous dynamic power range from 0 to -130 dBm. For the various measurement requirements, TC-2800A covers all power level within this range without gaps. The 30dB attenuator enables TC-2800A to meet low-level output requirements as low as -160 dBm.
Front LCD and Keypad Control
TC-2800A users need not establish PC connections or use separate programs to set GPS or GLONASS signal prameters. The intuitive, easy-to-use GUI and front keypad allow the user to set protocol parameters, RF output, and frequency efficiently. Such convenient setting allows the user to perform repetitive measurement easily in various conditions.
Remote Control
TC-2800A is equipped with USB-to-serial interfaces for users to control the devices remotely through USB on PC without RS-232C or GPIB interfaces. The user can run all functions using the provided commands and even create an automation program for mass production.
Firmware Upgrade
TC-2800A provides a simple upgrade program for users to upgrade the firmware through PC. The upgrade program is provided upon purchase, and the user can receive the upgrade data from the TESCOM website or through email.
◆ Single-channel GPS L1 C/A
◆ Single-channel GLONASS L1 C/A
◆ Single-channel BeiDou B1
◆ Wide dynamic power range from 0 to -130 dBm
◆ Signal data display through color LCD
◆ Easy control through frontal keypad without PC
◆ Remote control through USB Port
◆ Easy firmware upgrade through USB port
◆ Lightweight and slim, size of half the rack/2U
GPS Signal
Range: L1 C/A channel
Frequency: 1575.42 MHz
PRN: 1 ~ 32
GLONASS Signal
Range: L1 C/A channel
Frequency: 1602.00 MHz ± KΔf1, K = -7 ~ 6, f1 = 562.5 kHz
PRN: 1 ~ 32
BeiDou Signal
Range: B1 channel
Frequency: 1561.098 MHz
PRN: 1 ~ 37
Output Level
Rang: 0 ~ -130 dBm
Resolution: 0.1 dB
Interface
RF Out: N Type, 50 Ohm, DC isolated (> 0.1 MHz)
Reference IN: BNC Type, 10 MHz < ±10 ppm, 0 ~ 10 dBm @ 50 Ohm
Reference OUT: BNC Type, 10 MHz < ±1 ppm, 8 dBm ± 2 dB @ 50 Ohm
Miscellaneous
Line Voltage: 100 ~ 240VAC, 50/60 Hz
Dimension: 210(W) x 342(D) x 88(H) mm
Weight: 6 Kg
Packing Size: 335(W) x 454(D) x 145(H) mm
Packing Weight: approx. 7 Kg
* Please refer to the datasheet for details.
▷ TC-2800A GNSS Signal Generator
(In the case of GNSS tester order, GLONASS and GPS are the basic specification.)
▷ S2800-30 BeiDou S/W Option